由于印刷方面的各種因素，彩色印刷原稿的質量存在很多問題，如：偏色、暈虛、顆粒感強、缺少層次等等問題。所以要得到高質量掃描彩印原稿本，所以濟南彩色設計印刷技術人員需要根據不同的情況做具體的掃描措施，對原稿進行特定的矯正操作。那么彩色印刷如何處理原稿色偏問題？

Due to various factors in printing, there are many problems in the quality of color printing originals, such as color deviation, halo, strong graininess, lack of layers, and so on. Therefore, in order to obtain high-quality scanned color printing original manuscript, Jinan color design and printing technicians need to take specific scanning measures according to different situations and carry out specific correction operations on the original manuscript. So how to deal with the color deviation of the original in color printing?

在原稿色彩質量的分析中，若原稿的三色密度與反差基本是相同的，說明原稿不偏色，色調基本正常。如果階調齊全、層次豐富、分布合理，即使總反差略有差別，都可算是正常原稿。其顏色復制可按正常的色誤差數據進行校正，側則放在階調層次復制方面。

In the analysis of the color quality of the original, if the density and contrast of the three colors of the original are basically the same, it means that the original is not biased and the tone is basically normal. If the scale is complete, the level is rich, and the distribution is reasonable, even if the total contrast is slightly different, it can be regarded as a normal manuscript. The color reproduction can be corrected according to the normal color error data, and the emphasis is on the gradation reproduction.

若原稿的三色密度高低不同，說明偏向某一偏色，但三色密度的反差基本相等，是均衡偏色，多為色灰霧所致。這種偏色稿，一般階調層次還較好，可以用改變分色圖片高、低調三色網點記錄設定，并配合中調層次調整，使三色版圖片達到全階調即達到灰平衡再現，來圖像偏色。但好是根據三色密度曲線，設計出調整三色灰平衡的層次復制曲線，能使全階調的色調得到統一糾正。

If the trichromatic density of the original is different, it means that it is biased towards a certain color deviation, but the contrast of the trichromatic density is basically the same, which is caused by balanced color deviation, mostly due to color fog. This kind of color deviation draft has a good level of tonality. You can change the recording settings of high and low tone tri color dots of color separation picture, and coordinate with the adjustment of middle note level to make the tri color plate picture reach full level, that is, achieve gray balance reproduction, to eliminate image color deviation. But the good thing is that according to the tri-color density curve, a hierarchical reproduction curve is designed to adjust the tri-color gray balance, which can make the hue of the full-scale tone be uniformly corrected.

若原稿的高光三色密度基本一致，只有暗調端的三色密度不同，密度反差也不等，在中暗調表現明顯偏色。暗調層次略有損失，中高調層次正常?？梢愿淖兎稚珗D片暗調三色網點記錄設定，或附加某色的全調底色去除（只對混合復色有作用），來三色記錄圖片在暗調端的偏色。好也由三色密度曲線推導設計出調整灰平衡的三色層次復制曲線，能按準確數據糾正其偏色。

If the highlights of the original are basically the same, only the three color densities at the dark end are different, and the density contrast is also different, and the color deviation is obvious from the middle to the dark. The level of low key is slightly lost, and the level of medium and high key is normal. You can change the setting of the darkened three-color dot recording of the color separation picture, or add the full-tone background color removal of a certain color (only effective for mixed multi-color) to eliminate the color deviation of the three-color recording picture at the darkened end. It is also good to derive and design a three-color hierarchical replication curve to adjust the gray balance from the three-color density curve, which can correct its color deviation according to accurate data.

如果彩印原稿三色密度曲線是交叉的，其圖像色調偏向于一種顏色，而暗調端則偏向另一顏色，這是感光片本身三色平衡失調而造成的交叉偏色。其各級階調層次都不良，在掃描儀或分色機上直接用改變三色層次調整與記錄設定來糾正其偏色就不容易，必需依據其三色密度曲線，推導設計出精確的調整灰平衡三色層次復制曲線，指導其三色層次調整與記錄設定，方能使其復制效果稍有改善。偏色密度差距在0.2以上者，一般就很難矯正復制。

If the tri-color density curve of the color printing original is crossed, the image hue is biased towards one color, and the dark end is biased towards another color, which is the cross color deviation caused by the imbalance of the tri-color balance of the photographic film itself. It is not easy to correct the color deviation by changing the adjustment and recording settings of the three color levels directly on the scanner or color sorter. It is necessary to derive and design an accurate adjustment gray balance three color level replication curve based on its three color density curve, and guide its three color level adjustment and recording settings, so as to slightly improve its replication effect. It is generally difficult to correct and copy the color deviation density difference above 0.2.

這也就解釋了為什么印刷品出現變色的問題。畫冊、書刊、報紙、年畫、廣告畫等印刷產品，在陽光、燈光的照射下，通過油墨色料選擇性的吸收和反射，才能呈現出五彩繽紛、萬紫千紅的顏色。更多相關內容就來我們網站http://www.aozhouhui.com進行咨詢吧！

This also explains the problem of color change in printed matter. Printed products such as picture albums, books and periodicals, newspapers, New Year pictures, and advertising pictures can only show colorful and colorful colors through selective absorption and reflection of ink and color under the irradiation of sunlight and light. Come to our website for more relevant content http://www.aozhouhui.com Consult!