現在大多數印刷平面設計都使用電腦進行設計和制作。電腦的顯示器呈色出R（紅）、G（綠）、B（藍）色光三原色以色光加色法呈色，色域較大；而印刷呈色是由C（青）、M（品）、Y（黃）三原色和K（黑色）四種色料以色料減色法呈色，色域較小?？梢婋娔X呈色與印刷呈色原理不同、色域不同。
Nowadays, most printing graphic designs are designed and produced by computers. The computer display shows three primary colors of R (red), G (green) and B (blue), and the color is shown by color light plus color method, with a large color gamut; The printing color is composed of three primary colors of C (green), m (product), y (yellow) and K (black), which are presented by the color subtraction method, and the color gamut is small. It can be seen that computer color rendering and printing color rendering have different principles and color gamut.
印刷類平面設計制作的終輸出目標是進行C、M、Y、K四色印刷，所以設計師應在設計制作過程中以印刷色標來定義、調整和控制顏色，唯有如此，作品的顏色外觀才會有保證。如果是對圖形和文字進行著色處理，為了使印刷時有準確的顏色外觀，須在印刷色標冊上選定需要的顏色，并用其相應的CMYK色值組合對圖文對象進行設定。
The final output goal of printing graphic design and production is to carry out C, m, y and K four-color printing, so designers should define, adjust and control colors with printing color codes in the process of design and production. Only in this way can the color appearance of works be guaranteed. If you are coloring graphics and text, in order to have an accurate color appearance during printing, you must select the required color on the printing color code book and set the graphic object with its corresponding CMYK color value combination.
②原色與專色。這里所說的原色是指C、M、Y、K及其疊印色，又叫印刷色；專色是指印刷前預先混合而成的特定色油墨，如珍珠藍、熒光黃等，它不是靠CMYK疊印出來的顏色。在設計時是用CMYK四色印刷還是專色印刷呢？
② Primary color and spot color. The primary colors mentioned here refer to C, m, y, K and their superimposed printing colors, also known as printing colors; Spot color refers to the specific color ink pre mixed before printing, such as pearl blue, fluorescent yellow, etc. it is not the color overprinted by CMYK. Is CMYK four-color printing or spot color printing used in the design?

一般情況下，我們盡量使用原色，避免使用專色，原因有兩個方面：一是四色印刷可以組合出大部分的任意色，從而給設計師本人提供的設計自由；二是專色油墨多為進口油墨，高，在印刷時要專門制作一塊印版，單由一個機組走紙一次來完成該色的印刷，會大大增加印刷費用。 可如果是簡單的專色印刷，如報紙的套紅標題等，其成本比四色印刷成本要低。
In general, we try our best to use primary colors and avoid spot colors for two reasons: first, four-color printing can combine most of any colors, so as to provide the designer with the greatest design freedom; Second, spot color inks are mostly imported inks with high prices. During printing, a printing plate should be specially made. Only one unit takes the paper once to complete the printing of this color, which will greatly increase the printing cost. But if it is a simple spot color printing, such as the red cover headline of a newspaper, its cost is lower than that of four-color printing.
以上的精彩內容來自：濟南彩色設計印刷更多的精彩內容請點擊進入我們的網站：http://www.aozhouhui.com，我們后續會有更多的內容為您
The above wonderful content comes from Jinan color design printing. For more wonderful content, please click to enter our website: http://www.aozhouhui.com , we will have more content for you later